160T Expanded Metal Machine Installation and Trial Production in the UAE

DAPU installed and commissioned a 160T genişletilmiş metal makinesi at the customer’s factory in the UAE. Our technician worked through several specifications used in the customer’s daily production, combining equipment adjustments with repeated training. The objective was practical familiarity with the customer’s regular products, rather than a trial limited to one mesh specification.

Defining the finished mesh for each production requirement

Expanded metal serves construction, architectural, security and industrial applications in the UAE. Different products can call for different openings, strand dimensions, panel sizes and surface profiles. Those are application requirements, not interchangeable descriptions of one universal mesh.

For this customer, the commonly used production specifications guided the site work. The 160T designation identifies the machine installed; the relevant assessment is how its configured tooling, feeding and forming process work with the required material and mesh product. Tonnage alone does not explain why a particular opening or finished width is suitable.

Reading the product beyond the machine designation

The expanding process cuts and forms the sheet into connected strands and openings. The project’s mesh panels have a raised profile, with the strands standing out of the original sheet plane. This three-dimensional profile results from the way the sheet is cut and expanded.

Opening dimensions, strand width and panel dimensions describe different aspects of the mesh. Raised and flattened forms also need to be distinguished. Keeping those features separate gives a clearer basis for discussing a specification than using a broad description such as decorative mesh or construction mesh alone.

Close view of formed strands and openings in reflective expanded metal from the UAE project archiveExpanded metal sheets on a workshop floor beside large rollers in the UAE project archive
Raised expanded metal profile from the UAE project. Expanded metal panels at the UAE project site.

Moving from installation to several trial specifications

Our technician completed installation and commissioning at the UAE site, then worked with the customer’s technicians on several specifications from their normal production. The team practised repeatedly while adjustments continued until the customer was satisfied.

Multiple trial specifications make the handover more representative of everyday work. They give the customer more than one operating example and provide formed mesh from the production tasks that matter to the factory. This is the practical value of commissioning around regular products rather than around a single demonstration piece.

Relating trial output to the finished-product requirement

The useful focus during a multi-specification trial is the mesh produced: its opening pattern, formed profile and panel dimensions in relation to the intended specification. These are the relevant product characteristics to review, rather than treating machine movement alone as the result.

The customer gave positive feedback on the trial output. We continued commissioning and repeated practice on the regular specifications until the customer was satisfied.

A direct support channel after the visit

The customer can contact DAPU through a one-to-one online after-sales channel when questions arise after training. This keeps technical communication available as the factory continues production.

Send us your sheet material, thickness, mesh drawing and finished-panel requirements to discuss a 160T expanded metal configuration and a commissioning plan based on your actual production range.